The CED1200S is the first component of a new family of control units designed for safety related applications.
With Hardware Category 2, it can be used in applications up to Performance Level D / SIL 2.
It is programmable according to the IEC 61131-3 standard with PHC Studio Integrated Development Environment (CED1200W).
This robust unit is completely sealed and protected against water and dust ingress (IP67/IPx9K).
All the PWM power outputs are available with current closed loop for applications with proportional pressure reducing valves. 
The controller is suitable for 12V and 24V applications thanks to the 8 – 32V power supply input range. 
There are 24 general purpose inputs (analog, digital, frequency, …), 2 CAN bus ports and a 5V sensors supply output. 
The controller is qualified following the most rigorous international and customers standards.

Voltage supply: from 8 to 32 V
Total maximum output current: 50 A
Maximum output current per pin: 2 A / 6 A
Connector: Molex CMC 112 ways
Weather protection: IP67
Working temperature: from -40 to 85 °C (from -40 to 185 °F)
Storage temperature: from -40 to 85 °C (from -40 to 185 °F)
Maximum working temperature [°C]: 85
Maximum storage temperature [°C]: 85
Number of CANbus ports: 3 (standard and FD)
Number of analog inputs: 24
Number of temperature inputs: 6
Number of digital inputs: 12
Number of low side outputs: 12 (2A) 6 (6A)
Number of high side outputs: 24 (2A) 6 (6A)
Number of 5V outputs: 2